Conformational Changes of Poly(Maleic Anhydride-alt-styrene) Modified with Amino Acids in an Aqueous Medium and Their Effect on Cytocompatibility and Hemolytic Response.

The conformational changes of poly(maleic anhydride-alt-styrene) (PSMA) modified with different amino acids (PSMA-Aa) were studied in an aqueous medium as a function of ionic strength and pH. The specific viscosity of PSMA-Aa decreased with increasing salt concentration due to a more compact conformation. There was a decrease in surface tension with increasing concentrations of the modified polyelectrolyte having a greater effect for the PSMA modified with l-phenylalanine at pH 7.0, demonstrating a greater surface-active character. The conformational changes were also confirmed by molecular dynamics studies, indicating that PSMA-Aa exhibits a compact structure at pH 4.0 and a more extended structure at pH 7.0. On the other hand, the conformational changes of PSMA-Aa were related to its biological response, where the higher surface-active character of the PSMA modified with l-phenylalanine correlates very well with the higher hemolytic activity observed in red blood cells, in which the surface-active capacity supports lytic potency in erythrocytes. The cytocompatibility assays indicated that there were no significant cytotoxic effects of the PSMA-Aa. Additionally, in solvent-accessible surface area studies, it was shown that the carboxylate groups of the PSMA modified with l-phenylalanine are more exposed to the solvent at pH 7.0 and high salt concentrations, which correlates with lower fluorescence intensity, reflecting a loss of mitochondrial membrane potential. It is concluded that the study of the conformational changes in PE modified with amino acids is essential for their use as biomaterials and relevant to understanding the possible effects of PE modified with amino acids in biological systems.

Surfaces based on amino acid functionalized polyelectrolyte films towards active surfaces for enzyme immobilization.

Surface based on polyelectrolytes functionalized with amino acids onto amino-terminated solid surfaces of silicon wafers was prepared, with the purpose of evaluate the chemical functionality of the polyelectrolyte films in adsorption and catalytic activity of an enzyme. In this work, the adsorption of the enzyme glucose 6-phosphate dehydrogenase from Leuconostoc mesenteroides (LmG6PD) was studied as model. The polyelectrolytes were obtained from poly (maleic anhydride-alt-vinylpyrrolidone) [poly(MA-alt-VP)] and functionalized with amino acids of different hydropathy index: glutamine (Gln), tyrosine (Tyr) and methionine (Met). The polyelectrolytes were adsorbed onto the amino-terminated silicon wafer at pH 3.5 and 4.5 and at low and high ionic strength. At low ionic strength and pH 3.5, the largest quantity of adsorbed polyelectrolyte was on the films containing glutamine moiety as the most hydrophilic amino acid in the side chain of polymer chain (5.88 mg/m2), whereas at high ionic strength and pH 4.5, the lowest quantity was in films containing tyrosine moiety in the side chain (1.88 mg/m2). The films were characterized by ellipsometry, contact angle measurements and atomic force microscopy (AFM). The polyelectrolyte films showed a moderate degree of hydrophobicity, the methionine derivative being the most hydrophobic film. With the aim of evaluate the effect of the amino acid moieties on the ability of the surface to adsorb enzymes, we study the activity of the enzyme on these surfaces. We observed that the polarity of the side chain of the amino acid in the polyelectrolyte affected the quantity of LmG6PD adsorbed, as well as its specific activity, showing that films prepared from poly(MA-alt-VP) functionalized with Met provide the best enzymatic performance. The results obtained demonstrated that the surfaces prepared from polyelectrolytes functionalized with amino acids could be an attractive and simple platform for the immobilization of enzymes, which could be of interest for biocatalysis applications.

Inhibiting Pathogen Surface Adherence by Multilayer Polyelectrolyte Films Functionalized with Glucofuranose Derivatives.

Inhibiting pathogenic bacterial adherence on surfaces is an ongoing challenge to prevent the development of biofilms. Multilayer polyelectrolyte films are feasible antibacterial materials. Here, we have designed new films made of carbohydrate polyelectrolytes to obtain antibacterial coatings that prevent biofilm formation. The polyelectrolyte films were constructed from poly(maleic anhydride- alt-styrene) functionalized with glucofuranose derivatives and quaternized poly(4-vinylpyridine) N-alkyl. These films prevent Pseudomonas aeruginosa and Salmonella Typhimurium, two important bacterial contaminants in clinical environments, from adhering to surfaces. When the film was composed of more than 10 layers, the bacterial population was greatly reduced, while the bacteria remaining on the film were morphologically damaged, as atomic force microscopy revealed. The antibacterial capacity of the polyelectrolyte films was determined by the combination of thickness, wettability, surface energy, and most importantly, the conformation that polyelectrolytes adopt the function of nature of the carbohydrate group. This polyelectrolyte film constitutes the first green approach to preventing pathogenic bacterial surface adherence and proliferation without killing the bacterial pathogen.

Detection of hydrophobic microdomains in anionic polyelectrolytes with tris-(4,7-diphenyl-1,10-phenanthroline)3Cr(III).

This paper describes the changes in the luminescent properties of the tris-(4,7-diphenyl-1,10-phenanthroline)(3)Cr(III), [Cr(dip)(3)](3+) complex in an aqueous solution of three polyelectrolytes containing cyclohexyl, phenyl or 1-naphthyl groups in the side chain. When the polyelectrolytes form hydrophobic microdomains the luminescence of [Cr(dip)(3)](3+) is affected. The luminescence increases in the presence of cyclohexyl groups in the side chains, but decreases in the presence of phenyl and naphthyl groups (in that order). This fact can be explained in terms of a reductive quenching mechanism between the complex and the aromatic groups. Indeed, experiments performed with the complex and the alcohols corresponding to the functional groups, i.e., cyclohexanol, phenol, and naphthol, also show the same behavior, confirming the interaction with the functional groups and not other components of the polyelectrolyte. The luminescent properties of the [Cr(dip)(3)](3+) complex allow the detection of hydrophobic microdomains arising from the host-guest interaction. Moreover, the complex is able to distinguish between a nonaromatic hydrophobic microdomain and an aromatic one.

Potentiometric behavior of ion-selective electrodes to large cationic species modulated by decyl alcohol.

The effect of 1-decanol on the potentiometric response of three ion-selective electrodes to large cationic species is analyzed. The electrodes were constructed with plasticized PVC membranes. The results suggest that 1-decanol alters the ionic transport through the membrane/water interface to an extent that depends on the strength of the active ion pair. The water solubility of the cation, its molecular weight, and the size of the ion pair seem to be relevant factors in this type of behavior. The potentiometric selectivity coefficients are also dependent on the presence of 1-decanol in the membrane. These results are similar to those already described in ion-selective electrodes with membranes capable of sensing anionic benzene sulfonate-type systems. Thus, the effect of the alcohol appears to be general by affecting mainly the membrane surface polarity.

Influence of decyl alcohol on the potentiometric behavior of three p-alkylbenzenesulfonate ion-selective electrodes.

The influence of decyl alcohol on the potentiometric response of three para-alkylbenzenesulfonate (p-RBS) electrodes is analyzed. The results are clearly dependent on the membrane surface polarity due to the presence of the alcohol. The ionophore was the complex trioctylmethylammonium-p-RBS, (TOMA+)-p-RBS-, with R=H, CH3, and C2H5. The nature of the complex plays a fundamental role on the potentiometric behavior of the electrode showing that the more hydrophobic the complex, the better the potentiometric responses. Moreover, the electrodes selectivities for several hydrophilic and hydrophobic interfering anions were determined. The potentiometric results with interfering anions were coherent with the Pearson's hard and soft acid-base character of these anions.

Interfacial properties of poly(maleic acid-alt-1-alkene) disodium salts at water/hydrocarbon interfaces.

The interfacial properties of poly(maleic acid-alt-1-alkene) disodium salts at hydrocarbon/water interfaces are determined. In all the studied systems, the interfacial tension decreases markedly with the polyelectrolyte concentration as the side-chain length increases. The results of the standard free energy of adsorption, DeltaG(ads)(0), are a linear function of the number of carbon atoms in the polyelectrolyte side chain. The contribution to DeltaG(ads)(0) per mol of methylene group varies from -0.64 to -0.52 kJ/mol for the n-octane/water to n-dodecane/water interfaces. DeltaG(ads)(0) data also reveal that the adsorption process is mainly determined by adsorption efficiency. Comparatively, the adsorption effectiveness seems to play a less important role. The theoretical interaction energies calculated for the insertion of one hydrocarbon molecule into the space formed by two neighboring polyelectrolyte side chains are in good agreement with the experimental results. The latter results are consistent with van der Waals-type interactions between the hydrocarbon molecules and the polyelectrolyte side chains.

Effect of phenols on the potentiometric response of a nitrate-ion-selective electrode.

The effect of phenols containing different electron-withdrawing substituents on the potentiometric responses of several liquid PVC membranes containing the complex trioctylmethylammonium-nitrate, TOMA(+)NO(3)(-), is analyzed. The results make it possible to separate these phenols into two groups; those phenols containing electron-releasing groups, which produce almost Nernstian slopes, and those containing electron-withdrawing substituents, which generate sub-Nernstian slopes. The highly negative standard free energy of transfer of the aryl phenolic group from water to a cationic polar head suggests that these phenols are mainly located in the membrane phase associated with TOMA(+) via a cation-pi interaction. It seems that the strength of this interaction, and hence of the nitrate dissociation, is affected by the presence of phenols in an extension which correlates well with the kind of phenol present in these membranes and, consequently, with the type of their potentiometric responses.

Surface properties of poly(N-monoalkylmaleamic acid-alt-styrene) sodium salts: effect of the molecular weight and the side chain length.

The surface properties of poly(N-monoalkylmaleamic acid-alt-styrene) sodium salts are studied as a function of the molecular weight and the size of the linear alkyl lateral chain of the polyelectrolyte. The experimental results are well described by the Gibbs-Szyszkowski treatment. Both the surface tension behavior and the standard free energy of adsorption depend on the polyelectrolyte side chain and on the average molecular weight, M(w). An M(w)-dependent contribution to the free energy of adsorption ranging from -1.21 to -1.05 kJ for mole of methylene groups is found. The area covered by monomer units increases with M(w) and the sizes of side chains are similar to those reported in small-molecule systems. The nature of the functional group amide in the side chain has practically no effect on the surface properties as compared with the ester group in this kind of polyelectrolytes.

Effect of Dodecyl Alcohol on the Potentiometric Response of an Isopropyl Xanthate Ion-Selective Electrode.

An isopropyl xanthate ion-selective electrode was constructed using as a carrier the complex trioctylmethylammonium-isopropyl xanthate. Two kinds of plastic membranes were built, with dioctyl phthalate (DOA) and dioctyl adipate as plasticizers. In both cases, the electrical responses were linear in a wide range of xanthate concentrations, with the limit of detection between 10(-4) and 10(-5) M. The electrical response was improved by adding only 3 &mgr;mol of dodecyl alcohol per membrane. This fact seems to indicate not only that the fluidity is relevant but also that the surface polarity of the plastic membrane plays an important role. The analysis of some added salts shows that isobutyl xanthate is a strong interfering agent for the DOA electrode. Nitrate interferes weakly, whereas chloride, acetate, and carbonate do not affect the electrical response of both kinds of electrodes. Copyright 2001 Academic Press.